Air conditioning installation across Christchurch, Highcliffe, Mudeford and Burton, fitted by the local team.
A bedroom that's stuffy every summer or a lounge that's always the coldest room in winter is usually what brings a Christchurch household to air conditioning in the first place. Electrical Exchange installs air-to-air heat pump systems across the town and into Highcliffe, Mudeford and Burton, working from our Airfield Way base rather than travelling in from elsewhere.
Planning is the detail that varies most across Christchurch when it comes to an outdoor unit. Properties closer to the historic core near the Priory are more likely to sit inside one of the town's conservation areas or include a listed building, both of which affect where a unit can go and how it's mounted. Homes from the town's later expansion more often have straightforward garden space free of those considerations. Either way, siting is worked out at the free on-site consultation rather than assumed from the address.
We're with you from initial consultation through to ongoing support. That means understanding your specific heating and cooling needs first, then building a system around your home - not fitting your home around a standard package.
Every project starts with a free on-site consultation, so we can assess your property and give you an accurate, no-obligation quote before any work begins.
We're here to help
Call us on 07824 533 889
Unlike a traditional boiler and radiator setup, an air-to-air system delivers heat directly through the air rather than radiating it slowly from water-filled radiators. That means instant heat in winter and instant cooling in summer, with no waiting around for rooms to warm up or cool down.
Each room or zone is controlled independently, so you can cool a bedroom to the right temperature for sleeping in summer, keep a room comfortable for pets while you're out during the day, or take the chill off a lounge in winter, without heating or cooling the rest of the house.
Each room or zone is controlled independently:
If you already have solar panels or battery storage installed with us, we'll design your system to make the most of it - running heating and cooling from your own generation at no ongoing cost, provided you've got enough capacity.
An air-to-air heat pump system is made up of a small number of key components, each playing a specific role in getting heating and cooling into your home efficiently.
The outdoor unit sits outside the property and transfers heat in or out as needed. Refrigerant piping connects this to one or more indoor units, each installed in the room or zone it serves. A thermostat or zone controller then gives you precise, room-by-room control over temperature. Pairing the system with existing solar panels and battery storage can significantly reduce running costs, allowing heating and cooling to be powered by your own generation.
Request a FREE Home SurveyWith no distance to cover from our Christchurch base, we can get to your free on-site consultation without factoring in travel time, and while we're there we check room sizes, layout, existing setup and where the outdoor unit can go before recommending the right system for your home.
We design your system based on your heating and cooling needs, room layout and budget, ensuring each unit is correctly sized for efficient performance.
Our F-Gas REFCOM certified team installs the outdoor and indoor units, refrigerant piping and controls, converting your home into a fully controllable comfort system.
The system is tested, commissioned and certified. You receive a full handover pack so you can start enjoying year-round comfort straight away.
Outdoor Unit
We installed a Bosch Climate 5.3i outdoor unit as part of a full air-to-air heat pump system, sited to keep noise and visual impact to a minimum.
Indoor Unit
We fitted a Bosch Climate 3200i indoor unit, positioned for even airflow across the room and finished flush against the wall.
A starting point - get in touch if your question isn't answered here.
The whole town, plus Highcliffe, Mudeford and Burton as standard. Being based on Airfield Way rather than elsewhere in Dorset means there's no separate call-out charge for a Christchurch address.
Most domestic installations fall under permitted development, subject to size and mounting rules, but the right is excluded entirely for listed buildings and restricted in conservation areas, both of which Christchurch has. Because our systems heat as well as cool, they also meet the condition that the unit isn't used for cooling alone. We'll confirm your specific property's position at the free consultation rather than assume it either way.
There's no travel time to build into the schedule when the job's in the town we're already based in. Get in touch and we'll find a slot that works.
Ongoing support is part of what we offer, not an afterthought once the install's signed off. Our F-Gas REFCOM certified team, the same people who consult, design and fit your system, are the ones you'd call if it ever needs attention.
It comes down to the number of rooms or zones, your property's layout and the units specified, so we don't quote a fixed price without seeing it first. A free on-site consultation gets you a detailed, fixed quote with no hidden extras.
Modern indoor units run quietly, and the outdoor unit is sized and positioned at your consultation specifically to keep noise down, which matters more on some of Christchurch's tighter, closer-set streets than it does on a detached property with space around it.
Yes. If you already have solar panels or battery storage installed with us, we'll design your air conditioning system to draw on your own generation wherever possible, rather than treating it as a separate system on the property.
We install air conditioning throughout Christchurch and into these nearby areas as standard:
